Features in Common :
- Use car FM receiver and built-in microphone for answering
cellular phone calls while in driving.
- No customized works required. Installs and operates by
yourself.
- No lousy wiring required, plug power cord and phone cord into
connected sockets only.
- 201 receiving channel selections and 10 pre-select
memories for convenient management.
- Suitable for all kinds of vehicle no matter 12V or 24V.
- Interchangeable phone cords for new handset model replacement.
- an external earphone cable for
privacy communication.
- Elegant shape design promotes the car.
- CE and FCC approval.
Q3: Which cellular phone models are available now?
A3 :
For WAC2200,
please click
here for available phone models. For WAC2200-X,
please click
here for available phone models.
Q4
:
Is AirDraco family really easy to install and operate?
A4 :
You may refers to the following steps for installation
and operation.
1. ( If WAC2200-X, goes to Step 4.
) Set up the #1 preset button of your car FM receiver as the
dedicate cellular phone channel. ( Remember not to select your
favorite channel. Just to scan a channel which is not your
favorite one and with very weak
receiving signal to be your candidate. A channel if its signal is not
clear enough then it will be a potential candidate. ).Turn the
Hands-free kit on to test if the candidate channel will be
occupied or overwrite by the transmitted signal from the
Kit..
2.
Set up all other preset buttons for your selected channels.
3.
Scan and memorize all channels preset at Step 2 in your
Hands-free kit.. Goes to Step 5.
4. Scan and
memorize all preset channels of your car FM receiver in your
Hands-free kit.
5.
Set up your handset in auto answering status. ( Please refers to
handset manual for detail. Some handsets has to be inserted with
a earphone jack to have this feature available in advance. )
6.
Put Level switch at its proper position. (
Please refers to last page of Users Manual. )
7.
If something happened and how to solve it.
(1)
If humming is heard when in the conversation :
It's
possible that the car FM stereo is interfered by your handset.
Find a proper place or location for your handset or move it to a
new direction for improvement.
(2)
If the caller's voice is too small, please adjust the handset
volume to be louder.
(3)
If the caller's voice is too loud to have echo or broken sound,
please adjust the handset volume to be smaller.
(4)
Can adjust volume of the car FM stereo for suitable loudness. It
would rather to use handset for volume adjustment than to adjust the
volume of car FM receiver itself.
(5)
If some buzzwords from FM station are heard, please change to a
new channel to prevent the interference from the strong station
signal.
(6)
If the volume of your reply heard by the caller is too small or
too loud or to have echo happened, please check if the Level
switch is on the right position or to use an eternal microphone.
8.
When install the kit, please make a local call for testing and
follow the above suggestions to do the adjustment.
Q5 :
How to answer an incoming call while in driving ?
A5 :
For
WAC2200 :
(1).
If listening to the FM radio then press the preset button for
answering the call.
(2).
If listening to CD or cassette then switch to FM radio and press
the preset button for answering the call.
(3).
If the FM radio, CD, and cassette are all turned off then turn
the FM radio on and press the preset button for answering the
call.
For
WAC2200-X :
(1).
If listening to the FM radio then direct answer to the call.
(2).
If listening to CD or cassette then switch to FM radio to answer the
call directly.
(3).
If the FM radio, CD, and cassette are all turned off then turn
the FM radio on and answer the call directly.
Q6 : Shall I change LEVEL switch or tune a frequency every
time when I use the kit?
A6 : No, that depends.
1. When use the same Main Kit Unit in the same car again, no frequency
tuning is needed.
2. If a same model of handset is used then no need for the LEVEL
adjustment.
3. When use the Main Kit Unit at different cars, you should check
the preset channel and tune a new frequency if necessary.
4. When connect with a new handset, check LEVEL and switch it
to the right one.
Q7 : What is the product packed ?
A7 : For
WAC2200, it is packed
with a main kit unit, a voice collector cable, a power cord with cigarette
lighter adapter, an external earphone cable, an magnetic handset holder ( option
), a safety clip, a Velcro, an illustrated users
manual. For
WAC2200-X,
it is packed
with a main kit unit, a phone cord, a power cord with cigarette
lighter adapter, an external earphone cable ( option ), an external
microphone cable ( option ), an magnetic handset holder ( option
), a safety clip, a Velcro, an illustrated users
manual.
Q8 : Is extra phone cord available for separate orders ?
A8 : Yes, it is.